2PCS Flysky Long Range FS-GR3E Receiver, Xiangtat 3CH 2.4Ghz Receiver Compatible with FS-GT2 FS-GT2B FS-GT3B FS-GT3C FS-GT3X FZ-IT4S Transmitter RC Car Boat Truck

2PCS Flysky Long Range FS-GR3E Receiver, Xiangtat 3CH 2.4Ghz Receiver Compatible with FS-GT2 FS-GT2B FS-GT3B FS-GT3C FS-GT3X FZ-IT4S Transmitter RC Car Boat Truck Specifications: Channels: 3 Channels; Model type: car/boat; RF receiver sensitivity: -105dbm; Modulation: GFSK; System type: AFHDS; Sensitivity: 1024; Failsafe: yes (channel 2); Bind port: yes (channel 3); Power port: yes (VCC) Power: 4-6V DC; Weight: 6.5g; ANT length: 26mm; Size: 37.6*22.3*13mm ; Package List: 2 X Flysky FS-GR3E, 2 X Antenna tube, 2 X Bind plug. Customer Service 3 Years Warranty Time and Life Limited Friendly Customer Service. Any Question, please click “Xiangtat” to contact us. Thank you. Matching(Code) A. Install the battery to 2.4G transmitter and shut it down. B. Insert the matching lines to the channel BIND/CH3 port of the receiver. C. Connect the receiver battery to VCC port of the receiver, on the same time the two LED are flashing and this means the receiver are going to the matching status. D. Press and hold the button on the transmitter, and then switch on the power supply. Observe the LED on the receiver, if find that the LED is not flash anymore and that means successful Matched. (This process about 5s) F. Release the match button on the transmitter, take out the match line. G. Install the server and then test. H. If the tests fail, please repeat the action above. I. If the tests success, then insert the power supply port into VCC, match complete.